Tuttio Soleil 01 Upgraded Seat Cover

Tuttio Soleil 01 Upgraded Seat CoverLock yourself to the bike. This durable replacement cover gives your Tuttio Soleil 01 seat a fresh look and serious grip, built from heavy duty non slip material to handle the roughest riding while improving comfort and control. Stitched grip ribs keep you planted under hard acceleration and braking. Choose Most Aggressive or Less Aggressive grip to match your riding style. Designed to fit the Soleil 01 seat like most seat covers, install requires

Lock yourself to the bike. This durable replacement cover gives your Tuttio Soleil 01 seat a fresh look and serious grip, built from heavy-duty non-slip material to handle the roughest riding while improving comfort and control. Stitched grip ribs keep you planted under hard acceleration and braking.

Choose Most Aggressive or Less Aggressive grip to match your riding style. Designed to fit the Soleil 01 seat - like most seat covers, install requires proper stretching and stapling for a snug, professional finish.

Fits: Tuttio Soleil 01 seat.

Installation Instructions

Tools Required:

• Heavy-duty staple gun (6-8 mm staples recommended)
• Flathead screwdriver or pliers (to remove old staples)
• Scissors (if trimming excess material)

Installation Steps:

1. Remove the Old Cover (if applicable) - Flip the seat over and use pliers or a screwdriver to carefully remove the old staples. Take off the old cover and clean the seat base and foam.
2. Position the New Cover - Place the new cover over the seat, aligning the stitch lines with the center of the seat for straightness. Ensure it is evenly centered before stapling.
3. Staple the Front and Back First - Pull the cover tight at the front and staple it to the underside of the seat base. Next, pull the back end tight and staple it securely. This creates the foundation for an even fit.
4. Work Along the Sides - Starting from the center, pull the cover down one side and staple, then move to the opposite side. Continue alternating sides, pulling firmly to keep the cover tight and wrinkle-free. Use the stitch lines as a guide to keep it centered.
5. Finish and Trim - Once fully stapled, check for even tension and smoothness.

Tips for Best Results:

• Pull the material firmly, but avoid overstretching to prevent tearing.
• If wrinkles appear, remove a few staples and restretch that section.
• Double-check that the stitch lines remain straight and centered throughout installation.